Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Beverly Hills
If you own a fireplace in Beverly Hills, you already know the drill: the house is gorgeous, the flue is old, and the last thing you want is a surprise repair bill. Most sweeping jobs in Beverly Hills run between $229 and $379 for a standard fireplace, though larger estates with multiple flues and second-story access climb higher. We work throughout 90210, 90212, 90213, and 90209, and our crews are familiar with the gate codes, the property managers, and the architecture that make this city different from anywhere else in Los Angeles County. Call (866) 632-1828 to book a sweep, and we will tell you exactly what we will do before we touch the hearth.
Why Chimney Sweep Panorama City Is Beverly Hills’s Preferred Chimney Sweep Company
Our reputation in Beverly Hills comes from treating every chimney as its own job, not as one stop in a packed route. We have swept flues inside 1920s Spanish Colonial Revival estates off Sunset, mid-century moderns in the hills above Coldwater Canyon, and Tudor homes in the flats where the chimney stack is as much architectural detail as it is a vent. Moe Mathis leads every crew with a simple rule: match the method to the masonry. That means hand-cleaning a brittle clay tile liner rather than forcing a mechanical brush through it, and inspecting from the crown down so we catch what typical sweeps miss.
What separates us in Beverly Hills is access. Estate security and homeowner assistants are part of daily life in this city, and we have built working relationships with property managers who schedule our visits well in advance. We show up clean, background-checked, and ready to work around a landscape crew that might be trimming hedges below us while we inspect the cap. That level of coordination is not a luxury here. It is the only way the work gets done.
We also do not stop at sweeping. A full Chimney Sweep visit from us includes looking at the firebox, the smoke chamber, the damper, and the cap. If we flag a liner issue, we can often restore it with HeatShield rather than push a full reline. That matters in Beverly Hills, where relining a decorative chimney stack can mean design review, scaffolding, and weeks of disruption you never asked for.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
How Much Does a Chimney Sweep Cost in Beverly Hills?
A standard chimney sweep in Beverly Hills typically runs $229 to $379 for one fireplace with an accessible roof. Add a second fireplace and you are usually in the $400 to $600 range when we sweep both on the same visit. Large estates in 90210 with three or more flues, steep tile roofs, or difficult ridge access can run $650 to $900 or more. Here is how those numbers break down in this market:
- Basic sweep and inspection: $229 – $329 for one fireplace, creosote removal, and a Level 1 visual check
- Level 2 inspection with camera: $349 – $479 when you need the flue interior documented, often requested during escrow or after a storm
- Fireplace cleaning with heavy creosote: $300 – $400 when buildup is thick enough to require additional passes
- Chimney cap replacement: $180 – $450 for most residential caps, higher for custom copper or oversized flues
- Multi-flue estate sweep: $500 – $800+ depending on roof access and number of fireplaces
One thing that pushes pricing in Beverly Hills specifically is roof access. Many homes near the Beverly Hills Hotel and in Trousdale have steep pitches, clay tile roofs, or chimney stacks set far from a ladder point. We factor that into the quote honestly, before the crew arrives. A free estimate means exactly that: we walk or video the site, give you a number, and stick to it. Call (866) 632-1828 and we will schedule the estimate around your property manager’s availability if needed.
Fireplace Cleaning in Beverly Hills
Fireplace Cleaning in Beverly Hills is rarely a simple brush-through, because most fireplaces in this city are tied to chimneys built before 1950, and they deserve a methodical hand. A working fireplace off Roxbury Drive or in Beverlywood holds a different kind of creosote than a cabin wood stove: it bakes on during the occasional winter fire, then sits through months of warm dry weather, hardening into a glaze that a basic brush will not remove. We remove soot and creosote from the firebox, smoke shelf, damper, and cap while checking for water staining, cracked mortar joints, and rusted dampers as we go.
Creosote Removal on Older Flues
Creosote in a clay-tile-lined chimney hardens differently than creosote in a steel liner. On a 1930s Tudor off North Canon Drive, a heavy buildup near the smoke shelf can hide spalling tiles above it. We use hand tools and rotary loops sized for the existing liner, never an oversized brush that could fracture tiles already weakened by decades of thermal cycling. The goal is clean flue walls and a liner that stays intact.
Soot Cleaning for Fireplaces That See Light Use
Most Beverly Hills fireplaces burn a few nights a year, but soot from even ten fires can coat the damper and smoke chamber enough to create a musty odor that returns every time the air pressure drops before a Santa Ana. We clean those surfaces down to bare masonry and treat the dampers with a dry graphite lubricant rather than an oily spray that bakes into a sticky film. If your fireplace smells like cold ash in June, the soot layer is usually the reason.
Chimney Services in Beverly Hills
Chimney Services in Beverly Hills cover more than sweeping; they cover the structural and functional condition of a venting system that may be older than the homeowner’s title deed. We do Level 1 inspections as part of every sweep and Level 2 camera inspections whenever a property is in escrow, after a chimney fire, or when a downdraft complaint suggests an internal problem. On a mid-century modern in the hills near Franklin Canyon, a chimney may have been a decorative feature for decades, but it still vents a gas appliance and still needs a clear path to daylight.
Cap, Crown, and Damper Repairs
Chimney caps in Beverly Hills fail from constant sun exposure, not from freezing. The UV dries out the bonding mortar on crowns, and Santa Ana winds can loosen a cap that was never anchored well in the first place. We replace missing and damaged caps with Gelco or Copperfield models specified for the flue dimensions, and we rebuild crowns with a proper wash and expansion gap. A cap that is just set on top without fasteners will be in a neighbor’s yard by the next wind event.
HeatShield Liner Repair Without Full Relining
When a camera inspection shows cracks in a clay tile liner, we do not automatically reach for a full stainless reline. Our Beverly Hills HeatShield service uses this cerfractory resurfacing product to restore a liner’s integrity from the inside, sealing cracks and spalled areas without tearing out the original flue. On a Beverly Hills estate where the chimney is part of a protected facade, this can be the difference between a one-day repair and a multi-week masonry project that requires design review.
Why a Chimney Sweep in Beverly Hills Is Different
The 90210 ZIP is crowded with 1920s and 1930s Spanish Colonial Revival and English Tudor estates whose original clay tile chimney liners are now brittle and cracking. These liners were never designed to handle modern gas appliances without proper sizing, and they were built at a time when fireplaces vented wood smoke rather than the lower-temperature, higher-moisture exhaust from gas logs. Add the city’s design review rules, which can require approval even for replacing a visible chimney cap, and you have a level of regulatory friction that does not exist in Pico-Robertson or Beverly Grove. We handle both sides of it: the liner evaluation and the cap specification that will pass review. If the city asks for drawings, we provide the dimensions, materials, and installation method so the application does not stall.
Common Chimney Sweep Problems We See in Beverly Hills Homes
- Glazed creosote in lightly used fireplaces: The fire box gets hot, then the system sits for months. That cycle bakes creosote into a hard shell that smells and flakes. We see this routinely in homes along Benedict Canyon and Mulholland, where fireplaces are decorative most of the year.
- Cracked clay tile liners hidden by water staining: Early winter rain seeps through cracked crowns, and the moisture marks show up inside the firebox as white streaks before the liner cracks become visible. By the time a homeowner notices, the spalling has often begun.
- Downdrafts from Santa Ana wind patterns: Santa Anas push air down the flue and bring soot back into the living room. A poorly sized cap or a missing one makes it worse. The fix is sometimes as simple as a properly fitted cap; other times the flue itself is oversized for the fireplace.
- Access delays that turn into missed seasons: When a gate code changes, or a property manager changes, the chimney does not get inspected. We have arrived at homes where three or four years of buildup had accumulated simply because nobody could coordinate the visit. We schedule with whoever controls access and confirm the day before.
See the difference
Before
After
Before
After
Before
AfterTrusted Brands We Service in Beverly Hills
We work with professional trade-supply brands, not hardware-store substitutes. That means a Copperfield top-mounted damper goes in instead of a generic throat damper that rusts in two years. A HeatShield liner repair gets specified rather than a universal reline kit. A Gelco cap gets sized for the existing flue tile, not adjusted with a hose clamp. Moe Mathis has built the company around knowing which material belongs on which chimney, and we keep a stock of common parts ready for Beverly Hills jobs so a cap replacement or damper swap does not mean two weeks of waiting on an order.
Homes and Neighborhoods We Sweep Across Beverly Hills
We work in the flats below Sunset, the estate streets north of it, and the hillside homes that overlook the entire basin. Whether it is a Spanish Revival off North Canon Drive, a Tudor near Roxbury Park, or a contemporary above Trousdale, the method is the same: inspect first, clean according to the liner’s condition, and report what we found with photos. We also serve Beverly Hills adjacent neighborhoods like Beverly Grove, Beverlywood, Carthay Circle, and Pico-Robertson, where the homes share the same era of construction and the same clay tile liner profiles.
What a Chimney Sweep Visit Looks Like in Beverly Hills
We usually start on the roof, because the cap and crown tell us more than anything else about how the system has weathered. On a Spanish Colonial Revival estate off North Canon Drive, we were called for a downdraft complaint in a living room fireplace. Our tech found a cracked clay flue liner and a missing chimney cap that had allowed water in, causing spalling in the smoke chamber. We replaced the cap with a custom-fabricated copper model that matched the home’s historic profile and installed a HeatShield liner repair, restoring proper draft without altering the chimney’s exterior. That is the kind of job we do regularly here: preserve the look, fix the function.
We Also Serve Cities Near Beverly Hills
Our trucks cover the whole west side, and Beverly Hills jobs often turn into follow-up visits in Beverly Grove, Beverlywood, Carthay Circle, and Pico-Robertson. If you live in one of those neighborhoods and need a Chimney Sweep who actually inspects what he is cleaning, give us a call. The drive is short, and the homes are built from the same playbook of vintage masonry and aging flue tiles.
Serving Beverly Hills, CA – Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Beverly Hills
Every fireplace should be swept and inspected at least once a year, even if it is only lit a few times. On a larger estate in Beverly Hills with three or more flues, we recommend scheduling all of them on the same visit, which keeps the per-flue cost lower and gives you a single report covering the whole property. If any fireplace has not been used in several years, a Level 2 camera inspection is worth doing once to establish a baseline. Call (866) 632-1828 to schedule an estate-wide sweep and inspection.
Yes, and that is exactly how we approach older chimneys in Beverly Hills. We use hand brushes and rotary loops sized to the existing tile inner diameter, not an oversized wire brush that can crack brittle tiles. If the liner shows signs of water damage or spalling, we take photos and recommend HeatShield resurfacing before any aggressive cleaning. The cleaning method matters as much as the diagnosis.
Check whether your home falls under the city’s design review rules, which can apply to visible exterior changes on older and historic properties. We provide the cap dimensions and material specs you need for any application, and we install a Gelco or custom copper cap that is anchored and weatherproof. Start by calling (866) 632-1828 for a free site assessment so you know the exact size and condition before any paperwork begins.
Santa Ana winds push air down the flue faster than the chimney can draw upward, forcing soot and stale air into the room. A chimney cap that is missing or sized wrong allows even more of that reverse flow. The fix can be a proper wind-resistant cap, and sometimes the flue itself is too large for the fireplace, which we can correct by resizing the cap or adjusting the damper. We diagnose these downdraft complaints regularly in the hillside homes around Beverly Hills.
Yes. Gas fireplaces and inserts still produce soot and moisture, and they still need annual inspection, especially in older homes where a wood-burning fireplace was converted to gas. We check the venting path, the burner condition, and the flue sizing to confirm the exhaust is leaving the house. A gas log set installed into an old wood flue without proper sizing can cause condensation problems that eat through the liner. We address that before it becomes a repair.
Book a Chimney Sweep in Beverly Hills
If you own a fireplace in Beverly Hills, do not wait until the first cold night to find out the flue is blocked or the damper is seized. We work around estate access schedules, coordinate with property managers, and provide camera-backed documentation so you know exactly what we found. Moe Mathis leads every call with the same standard: professional-grade materials, honest diagnosis, and no upsell on work your chimney does not need. Call (866) 632-1828 for a free estimate on a chimney sweep, fireplace cleaning, or full system inspection anywhere in Beverly Hills and the surrounding west side.
Written by Moe Mathis, Owner at Chimney Sweep Panorama City, serving Beverly Hills since 2011.