Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Beverly Hills, CA
We provide independent Gelco chimney cleaning, inspection, and repair across Beverly Hills, including the 90210, 90212, 90213, and 90209 ZIP codes. For nearby communities, we also offer Chimney Sweep – Beverly Hills coverage. The thing that separates our Gelco work here is simple: most of these chimneys sit atop original 1920s and 1930s clay-tile flues, and cleaning them without damaging ornate stucco stacks takes a different approach than a standard sweep. If your Gelco insert or cap needs attention, call (866) 632-1828 for a free estimate and we’ll come look at it properly.
We work on Gelco wood-burning inserts, gas inserts, dampers, and top-mount caps throughout Beverly Hills. As an independent provider, we diagnose and repair Gelco equipment on its merits, and we’ll tell you straight when a unit is worth fixing versus replacing. No authorization or partnership with Gelco is implied, and we’ve never needed one to do the job right.
Why Beverly Hills Residents Choose Us for Gelco Service
Most chimney companies in Beverly Hills don’t stock Gelco-specific gaskets, glass, or cap fasteners. We do, or we can source them within a day or two from the trade suppliers we’ve worked with for years. That matters when a Santa Ana wind event lifts a top-mount cap on a 1930s Spanish Colonial Revival stack and your fireplace starts backdrafting smoke into the living room.
Moe Mathis, our owner, grew up a few blocks from Arleta, just east of Panorama City, and has spent the better part of three decades working chimneys across the San Fernando Valley and the Westside. He learned the trade through the vocational programs at Los Angeles Valley College in Van Nuys, then refined it on real jobs, learning how clay-tile liners age, where masonry fails first on older estates, and what creosote buildup actually looks like at each stage. His rule is simple: “If it needs doing, I’ll tell you. If it doesn’t, I’ll tell you that too.”
When you call us for Gelco sales & service, you get a crew that treats your chimney as a system, from firebox to cap, not as a quick sweep-and-go.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Beverly Hills
- Hardened insert glass gaskets and door seals. In low-use Beverly Hills fireplaces, Gelco insert glass doors and gaskets sit for months, sometimes years, between fires. The gasket material hardens and loses its seal, letting smoke and downdraft spill into the room when you finally light a fire. We replace gaskets with genuine Gelco or quality aftermarket equivalents and test the seal before we leave.
- Corroded top-mount caps on ornate stacks. Gelco multi-flue and single-flue caps mounted on 1920s and 1930s stucco or brick stacks corrode at the fasteners after years of dry heat and winter rain. Santa Ana winds then rattle the cap or lift it enough to let debris and soot back down the flue. We replace caps with profile-matched units, which matters more in Beverly Hills than almost anywhere else, for reasons we’ll get to below.
- Fouled pilot assemblies and thermocouples in rarely-used gas inserts. Hillside mid-century moderns in Beverly Hills often have gas inserts that sit unused most of the year. Pilot assemblies and thermocouples foul when they’re not run regularly, causing intermittent ignition or a pilot that won’t stay lit. We service Gelco gas inserts and gas log sets and can usually fix ignition problems on the first visit.
- Seized dampers on original clay-tile flues. Soot and wind-driven debris collect in original clay-tile flues during long dry spells, then winter rain makes the mess sticky. Gelco dampers seize open or shut as a result, which is both a draft problem and an energy-loss problem. We free and repair dampers as part of a full cleaning, not as a separate upsell.
- Backdrafting after Santa Ana wind events. Beverly Hills gets hit with Santa Ana winds that push debris and soot back down flues and create downdraft complaints. Gelco wood-burning inserts with worn door gaskets are especially vulnerable. We clean the flue, check the cap, and reseal the doors so the fireplace drafts the way it should.
Gelco Service in Beverly Hills: What Local Conditions Mean for Your Equipment
Beverly Hills design-review rules mean even a chimney cap can trigger a review, so Gelco cap replacements on 90210 estates often have to match existing profiles and colors rather than default to a stock multi-flue unit. That’s not a formality. On a 1930s Spanish Colonial Revival estate in the flats, our tech climbed to a decorative stucco stack and found a corroded Gelco top-mount cap lifting at its fasteners after a Santa Ana wind event, with soot blown back down an original clay-tile flue. We performed a Level 2 inspection, replaced the cap with a profile-matched unit, and swept the flue so the rarely-used fireplace drafted cleanly again, all coordinated through the property manager after our crew cleared the gate background check. That’s routine work here. In most cities, you swap the cap and leave. In Beverly Hills, you match the cap to the house or you create a problem for the owner. We bring the same careful approach to our Beverlywood Gelco service and surrounding areas. down the line.
This is also why we photograph every cap and flue condition before and after. When a property manager or homeowner’s assistant needs documentation for a design-review file, we can hand it over without a second visit.
Gelco Models & Products We Service in Beverly Hills
We service Gelco wood-burning fireplace inserts with glass bi-fold or cabinet doors, Gelco gas fireplace inserts and gas log sets, Gelco top-mount multi-flue and single-flue chimney caps, and Gelco replacement dampers and firebox grates. When a part fails, we fit genuine Gelco components where they’re still available, and quality aftermarket equivalents for gaskets, glass, dampers, and caps when they aren’t. We keep common Gelco gasket sizes and cap fasteners on the truck so most Beverly Hills jobs don’t require a second trip. For less common parts, we source from the same trade suppliers we’ve used for years, which usually means a one- to two-day turnaround, not a week.
If you’re unsure which Gelco model you have, call us and describe it, or send a photo. Most of the time we can identify it from the door hardware alone.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Beverly Hills
A Gelco chimney cleaning in Beverly Hills typically runs between $200 and $375, depending on flue condition, roof access, and whether the unit is a wood-burning or gas insert. If we’re replacing a Gelco top-mount cap on an ornate stucco or brick stack, expect $450 to $900 installed, with the higher end reflecting profile-matched caps that need to satisfy design-review requirements. Gasket and door seal replacement for Gelco inserts usually runs $150 to $350, and gas pilot or thermocouple service lands between $150 and $450 depending on the part.
- Standard Gelco chimney cleaning: $200 – $375
- Gelco top-mount cap replacement (profile-matched): $450 – $900
- Gelco insert gasket and door seal replacement: $150 – $350
- Gelco gas insert pilot or thermocouple service: $150 – $450
- Level 2 inspection (includes camera where needed): $200 – $500
Every estimate is free and we give you the number before we start, not after. Call (866) 632-1828 and Moe or one of the crew will walk through what your Gelco unit actually needs.
Serving Beverly Hills, CA – Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. We also handle Gelco in Pico-Robertson and nearby neighborhoods. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Beverly Hills
It depends on the property and the cap. If the replacement matches the existing profile, color, and mounting style, most Beverly Hills design-review boards treat it as maintenance rather than an alteration. That’s exactly why we default to profile-matched Gelco or aftermarket caps on 90210 estates rather than whatever’s on the truck. If the cap is visibly different from the original, a review becomes more likely. We can document the before and after so you have what you need if questions come up. Call (866) 632-1828 and we’ll assess your specific stack.
In our experience, the most common culprits in hillside Beverly Hills homes are fouled pilot assemblies and worn thermocouples in Gelco gas inserts that sit unused for months at a time. The pilot orifice gathers dust and the thermocouple loses its voltage, so the gas valve shuts off as a safety measure. We clean and test the pilot assembly, replace the thermocouple when needed, and verify the gas log set is seated correctly. It’s usually a same-visit fix. Call (866) 632-1828 for an exact diagnosis and a free estimate.
Yes, and we do it carefully. Original clay-tile flues from the 1920s and 1930s are common across Beverly Hills, and they need hand-cleaning rather than aggressive mechanical sweeping. We perform Level 2 inspections with a camera when the flue condition warrants it, document what we find, and explain in plain terms whether the clay liner is serviceable for your Gelco insert or whether restoration should be considered. We don’t recommend work you don’t need. Call (866) 632-1828 to schedule an inspection.
Most of the time, yes, if the cap’s fasteners are in good shape and the cap is sized correctly for the flue. What we see after Santa Ana wind events in Beverly Hills is corrosion at the fasteners from years of dry heat followed by winter rain, which is what allows the cap to lift or rattle. We tighten, reseal, or replace cap fasteners as part of our service, and we’ll tell you honestly if your existing Gelco cap can be secured for another season or needs to be replaced outright.
That’s actually most of the Gelco wood inserts we see in Beverly Hills. Fireplaces here get light use because of the warm Mediterranean climate, which means gaskets harden, dampers seize, and debris accumulates over long idle stretches. We service low-use Gelco inserts by cleaning the flue, testing door seals, checking the damper, and confirming the cap is clear. It’s preventative work, not reactive, and it’s cheaper than waiting for a backdraft to make the fireplace unusable. Call (866) 632-1828 and we’ll get you on the schedule.
Service Areas Near Beverly Hills
We serve Beverly Hills and the surrounding Westside and Valley communities, including Bel Air, Beverly Grove, Panorama City, Sun Valley, and Lake View Terrace. If you’re just outside Beverly Hills, we likely still cover your street. For Beverly Hills service area details, give us a call. If you’re closer to the Fairfax District, see our Gelco service in Beverly Grove page. For foothill communities, check Gelco service in Tujunga.
Book Your Gelco Service in Beverly Hills Today
If your Gelco insert, cap, or damper needs attention anywhere in Beverly Hills, or you need Gelco repair in Carthay Circle, call (866) 632-1828. We’ll schedule a time that works with your property manager or gate access, show up with the right parts, and tell you plainly what needs doing and what can wait. Free estimates, no runaround.
Written by Moe Mathis, Owner at Chimney Sweep Panorama City, serving Beverly Hills since 2011.