Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Beverlywood, CA
Most Beverlywood chimneys were built with the house, which means the flue tiles, crown, and cap date to the 1940s or 1950s. Add decades of Santa Ana wind, a dense canopy of eucalyptus and palm, and a high-fire-severity zone, and you get a chimney that needs more than a quick sweep. Chimney Repair is our most requested service in Beverlywood, because the original masonry is solid but the components above the roofline rarely are. We work on the full system, from firebox to cap, using professional trade-brand materials sourced for the specific repair. Call (866) 632-1828 for a free estimate.
Why Beverlywood Homes Are Different
Beverlywood is a mid-century planned community. Most of the homes are ranch-style or traditional two-story builds from the 1940s and 1950s, with original brick or stucco chimneys and clay tile flues. The fireplaces see occasional wood use, but the bigger issue here isn’t creosote. It’s what the wind and the trees put into the flue, and what decades of dry heat have done to the mortar joints, the crown, and the spark arrestor.
After a windy week, we pull eucalyptus leaves, palm frond debris, and sometimes stunned or nesting birds out of Beverlywood flues. The mature street trees overhang nearly every roofline in the 90035 ZIP. Dry Santa Ana winds pack that debris against the flue walls and fill the smoke shelf. Then the first cool night arrives, someone lights a fire, and smoke backs into the living room. We see it every season. The local angle here is simple: Beverlywood chimney work is less about wood-burning residue and more about debris clearing, spark arrestor checks, and restoring weather-damaged components before fire season gets serious.
Because Beverlywood sits in a high-fire-severity zone, an intact spark arrestor and a clean flue aren’t optional maintenance. They’re the difference between a stray ember that dies on the screen and one that leaves the chimney. Our crews treat every Beverlywood job with that context in mind.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Beverlywood Services
Beverlywood homeowners call us most often for two things: a proper chimney sweep before the first burn of the season, and a dryer vent cleaning after a hazard gets flagged or a drying time suddenly doubles. Both are in-house services with the same crew, no referrals.
Chimney Sweep in Beverlywood
A sweep in Beverlywood usually means clearing leaf nests, palm debris, and bird material more than heavy creosote. Wood burning here is occasional, so creosote buildup stays light, but the flue still needs to be checked end to end, and the spark arrestor needs eyes on it every year. We also inspect the flue tiles and smoke shelf while we’re in there, because the original clay liners in these 1940s and 1950s homes crack over time. More on that service here: Chimney Sweep in Beverlywood.
Dryer Vent Cleaning in Beverlywood
Dryer vents in Beverlywood homes run through walls, crawl spaces, and sometimes up through the roof, which means lint accumulates in hidden runs for years, often unnoticed until airflow drops and dry times creep up. We treat dryer vent cleaning as its own fire-safety service, with dedicated equipment and a focus on the entire run, not just the first few feet. If your dryer’s been taking two or three cycles to dry a load in a 1940s laundry room, the vent is the first thing to check. Details: Dryer Vent Cleaning in Beverlywood.
Chimney Repair in Beverlywood
Chimney repair in Beverlywood centers on a specific problem: the original masonry and flue tiles from the 1940s and 1950s are still in place, but the components exposed to weather have degraded. That means cracked crowns, rusted or missing caps, deteriorated flashing, and flue tiles with hairline cracks that get worse with each hot-cold cycle. Because wood burning is infrequent, homeowners often don’t notice the damage until a leak shows up on the ceiling or a home inspection flags the flue. Our repair work uses professional trade brands like Gelco, Olympia Chimney, Famco, and Copperfield, the same suppliers commercial contractors order from, not big-box substitutes. We specify the right product for the repair, then source it from the suppliers professionals trust. You can read more about our full repair scope here: Chimney Repair.
Chimney Cap Installation
Signs you need it
Leaves and twigs inside the firebox, rain stains on the damper, or birds rustling in the flue are the most common signals a Beverlywood chimney has no cap or an undersized one.
What it costs in Beverlywood
Chimney cap installation in Beverlywood typically runs $200 to $450, depending on flue size and cap material.
How we do it
We measure the flue opening, match a Gelco or Famco cap to the exact dimensions, and secure it to the crown so it stays put through Santa Ana winds.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the chimney, damp drywall in the attic, or visible gaps between the flashing and the chimney stack mean the seal has failed.
What it costs in Beverlywood
Chimney flashing repair in Beverlywood typically ranges from $250 to $500, with the price driven by accessibility and how much old flashing has to come off.
How we do it
We remove the old flashing, inspect the masonry behind it, install new flashing with proper overlap, and seal every seam so water runs off instead of in.
What Chimney Repair Costs in Beverlywood
| Item | Typical range in Beverlywood |
|---|---|
| Chimney cap installation | $200 – $450 |
| Chimney flashing repair | $250 – $500 |
| Chimney crown repair | $300 – $700 |
Can you repair a chimney crown without rebuilding the whole chimney?
Yes. A cracked crown is contained damage, not structural failure. We patch or recast the crown in place, which stops water from entering the masonry, and it’s a fraction of what a rebuild would cost.
How long does a chimney repair take in Beverlywood?
Most cap installations and flashing repairs finish in one visit, typically two to four hours. Crown work can need a little more time for the material to cure, but you’ll have a clear timeline before we start.
Brands We Service in Beverlywood
We stock and install Gelco, Olympia Chimney, Famco, and Copperfield components for Beverlywood jobs. These are the brands trade supply houses carry, and they’re what we reach for when a cap, flashing, or liner component needs to match the original chimney’s dimensions. Turnaround on replacement parts is quick, usually a couple of days. For details on the full lineup, visit our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Beverlywood, CA
| Service | Typical range in Beverlywood |
|---|---|
| Chimney sweep (single flue) | $139 – $229 |
| Chimney sweep (two flues) | $189 – $279 |
| Dryer vent cleaning | $89 – $159 |
| Chimney cap installation | $200 – $450 |
| Chimney cap replacement | $175 – $400 |
| Chimney flashing repair | $250 – $500 |
| Chimney crown repair | $300 – $700 |
| Chimney liner installation | $1,200 – $2,800 |
What pushes a Beverlywood chimney price up is access. A two-story roofline with a steep pitch takes longer to set up safely than a single-story ranch, and a flue packed with months of eucalyptus debris adds time to the sweep. The price we quote before we start is the price on the invoice. No surprises after the fact.
Neighborhoods We Serve in Beverlywood
Our crews work throughout the 90035 ZIP and the surrounding blocks. We’re familiar with the mid-century layouts, the mature trees, and the rooflines here, which means we know what we’re getting into before the ladder goes up. Same-day calls in the area are often possible, but most Beverlywood sweeps are booked a few days out.
- Beverlywood proper
- South of Pico
- East of Robertson
- North of the 10
- Adjacent blocks in Carthay-adjacent streets
Service Area – Cities Near Beverlywood
Chimney Sweep Panorama City serves Beverlywood and the surrounding communities. If you’re in Carthay Circle, CA, Pico-Robertson, CA, Beverly Grove, CA, or Beverly Hills, CA, we cover those areas too. The same crew, the same brands, the same upfront pricing.
Serving Beverlywood, CA – Our Local Coverage Area
We’re based in the Beverlywood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Beverlywood
Most Beverlywood calls are scheduled within a few days. We keep routes through the west side several times a week, so it’s rare to wait more than five business days. If you’ve got a burning question about your chimney, call us and we’ll tell you straight what the timeline looks like.
For routine sweeps and most repairs, no. If you’re in a Beverlywood pocket with an active HOA and the work involves anything visible from the street, like a new cap, it’s worth a quick check with your association. We’ll tell you what’s visible from the curb before we do the work.
We come out, look at the chimney from the roofline and the firebox side, and give you a written number before any work starts. That’s the price. No add-ons after the fact. Call (866) 632-1828 to set it up.
Chimney Sweep Panorama City has served Beverlywood since 2011. Call (866) 632-1828 for a free estimate on chimney sweeping, repair, or dryer vent cleaning.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverlywood Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Kevin Walsh"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Jerome Prince"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Diego Ramirez